IDEC SE2L Series User Manual Download

Page: 115 / 152

SE2L User’s Manual (SE9Z-B1865)

114

Figure 7-47

Reference region configuration example

For example, to monitor the sensor’s displacement by referring the background, choose the line drawing

tool and draw a line segment over the background by mouse drag and drop. Reference region with the

±tolerance is generated on that location (Figure 7-47).

7.16 Transmit configurations to SE2L

When all the configurations are complete, click “Confirm” button to verify the configuration. On the

confirm screen, check general, function and area settings in order. If any correction is required, return to

related tab and reconfigure the setting. On the area confirm screen, click each area preview to confirm all

areas. Transmission is prevented until the green line appears on all the area preview items. When

confirmation is complete, connect the application with SE2L if it is not connected and click “Transmit to

sensor” to transmit the configuration. In the disconnected state the configuration can be saved into SD card

memory by clicking on the “Save to SD card” button.

Summary of Contents for SE2L Series

























































































































































Search results

Summary of Contents for SE2L Series

Reviews:

Related manuals for SE2L Series

Brands by name

Popular brands

IDEC SE2L Series, User Manual

Search results

Summary of Contents for SE2L Series

Reviews:

Related manuals for SE2L Series

Brands by name

Popular brands