SE2L User’s Manual (SE9Z-B1865)
24
3.6 Incremental encoder
In SE2L there are 2 pairs of encoder input terminals for connecting 2 units of dual channel incremental
encoder signals. Area will be switched depending on the encoder speed. Direction of travel is detected by
encoder's phase A and phase B signals having the phase difference of 90°. Speed and rotating direction of
both encoders are constantly monitored to detect abnormal travel and stop the AGV.
Incremental encoder output signals should be connected to the respective input terminals of SE2L. There
are two patterns of signals generated by the combination of Phase A and Phase B of encoders depending on
the direction of travel (Figure 3-10). In the first pattern, Phase B is 90 degrees ahead of Phase A wherein, at
the rising edge of Phase A, state of Phase B is “H”. This pattern is considered as positive direction (forward
motion). In the second pattern, Phase B lags behind Phase A by 90 degrees and the state of Phase B at the
rising edge of Phase A is “L”. This is considered as negative direction (backward motion).
Figure 3-10 Input signal through Incremental encoder
Summary of Contents for SE2L-H05LPC
