IDEC SE2L-H05LPC, User Manual

Page: 113 / 152

SE2L User’s Manual (SE9Z-B1865)
112
7.15.3 Muting configuration
Muting function temporary suspends the safety functions of SE2L when required conditions are fulfilled.
Follow the steps below to configure muting function.
 Confirm that muting function is enabled in the function tab.
 Before configuring the muting zone it is necessary to configure the protection zone. Configure the
protection zone if it is not yet configured.
 When muting button is clicked, muting configuration screen is displayed. Drag and drop the mouse
over the protection zone to configure the muting region inside it. Protection zone is displayed in red
and the muting region is displayed in pink.
 Figure 7-45 and 7-46 shows an example of the muting zone configuration. Region in pink
represents the muting zone.
 Confirm that the muting configuration is correct.
Figure 7-45 Muting zone configuration example 1
Muting zone configuration example as straight line is drawn from point 1 to point 2
 While using the teaching function, user should confirm that the configured zone
meets the safety requirement.
 Distance from area to the background should be in the range of 100mm to 700 mm.
 If the distance exceeds the above mentioned range, there may be unprotected
hazardous area that could lead to critical injury or death.
Protection zone Muting zone
1
2