IDEC SE2L-H05LPC, User Manual

Page: 112 / 152

SE2L User’s Manual (SE9Z-B1865)
111
7.15.2 Area configuration by teaching function
Automatic zone configuration by referring the boundary can be done by using the SE2L’s Teaching
function. This function is useful when user needs to configure complex zone or would like to reduce the time
for zone configuration. Steps below show the configuration procedures using the teaching function.
 Ensure the SE2L is connected with the PC.
 Click on the Teaching button.
 Enter the offset to be applied between the zone and the background (Max offset 2100mm).
 Click the “Teach” button (Figure 7-43).
Figure 7-43 Teaching setting
Figure 7-44 Area configured by teaching
 After the area is created automatically it can be edited using the drawing tools.
 Obtaining the background data starts when the “Teach” button is clicked. Configured area will resemble
the SE2L’s background. (Figure 7-44). When configuring the protection zone, if the background is not
within the maximum detection distance it is set to maximum detection distance of SE2L. In case of
warning area, if there is no background within 20m from SE2L it will be set to 20m.