IDEC HR6S-AF, Original Instructions Manual

Page: 10 / 93

10
HR9Z-B2192 8/2020
Product Related Information
This equipment has been designed to operate outside of any hazardous location. Only install this
equipment in zones known to be free of a hazardous atmosphere.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

Disconnect all power from all equipment including connected devices prior to removing any
covers or doors, or installing or removing any accessories, hardware, cables, or wires except
under the specific conditions specified in the appropriate hardware guide for this equipment.

Always use a properly rated voltage sensing device to confirm the power is off where and when
indicated.

Where 24 VDC or VAC is indicated, use PELV power supplies conforming to IEC 60204-1.

Replace and secure all covers, accessories, hardware, cables, and wires and confirm that a
proper ground connection exists before applying power to this equipment.

Use only the specified voltage when operating this equipment and any associated products.
Failure to follow these instructions will result in death or serious injury.
DANGER
POTENTIAL FOR EXPLOSION
Install and use this equipment in non-hazardous locations only.
Failure to follow these instructions will result in death or serious injury.