Ranges & Accuracies:
Input Impedance is 9.1M
Ω
(20-600V AC/DC), 10M
Ω
(2V AC/DC), 100M
Ω
(0-200mV AC/DC)
Double Insulation
Instrument has been evaluated and complies with insulation category II (overvolt-
age category II). Pollution degree 2 in accordance with IEC-644. Indoor use.
Warranty Statement:
This tester is warranted to the original purchaser against defects in material and
workmanship for the lifetime of the product. During this warranty period, IDEAL
INDUSTRIES, INC. will, at its option, replace or repair the defective unit, subject
to verification of the defect or malfunction. This warranty does not apply to
defects resulting from abuse, neglect, accident, unauthorized repair, alteration, or
unreasonable use of the instrument.
Any implied warranties arising out of the sale of an IDEAL product, including but
not limited to implied warranties of merchantability and fitness for a particular
purpose, are limited to the above. The manufacturer shall not be liable for loss of
use of the instrument or other incidental or consequential damages, expenses, or
economic loss, or for any claim or claims for such damage, expenses or
economic loss.
State laws vary, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Function
Range and
Accuracy
Overload
Resolution
Protection
AC Voltage 200.0mV/2.000V/20.00V/200.0V/600V 4.0% + 5 digits 600 VDC or AC rms
(50/60 Hz)
DC Voltage 200.0mV/2.000V/20.00V/200.0V/600V
2.0% + 2 digits 600 VDC or AC rms
200.0
Ω
2.0% + 5 digits
Resistance
2.000k
Ω
/20.00k
Ω
/200.0k
Ω
2.0% + 4 digits
450 VDC or AC rms
2.000M
Ω
3.0% + 4 digits
20.00M
Ω
5.0% + 5 digits
Continuity
Audible indication < 25
Ω
N/A
450 VDC or AC rms
Response time: 500ms
Diode
Test current: 1.2mA
3.0% + 3 digits
Open circuit volt: 3.0 VDC typical
~
7
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178
Technical Hotline: 877 201-9005
www.testersandmeters.com
ND 4950-1
Made in Taiwan
ND 4950-3 61-605 Instructions 10/27/06 9:32 AM Page 7
