IDEAL istor HE260, Installation And Servicing, Page: 42 / 80

42
istor system store -
Installation and Servicing
INSTALLATION
50 HANDING OVER
8. Loss of system water pressure
Explain that the pressure gauge inside the lower door
indicates the central heating system pressure and that if
the normal COLD pressure of the system is seen to
decrease over a period of time then a water leak is
indicated. In this event a registered local heating installer
should be consulted.
WARNING.
Do not fire the boiler if the pressure has reduced to zero
from the original setting.
9.
After installation and commissioning please complete
the Benchmark Commissioning Checklist before
handover to the customer.
For IE, it is necessary to complete a “Declaration of
Conformity” to indicate compliance to I.S.813:2002.
10. IMPORTANT
A comprehensive service should be carried out ANNUALLY.
Stress the importance of regular servicing by a Gas Safe
Registered Engineer. In IE servicing work must be carried
out by a Registered Gas Installer (RGII).
As the installer you may wish to undertake the service
contract yourself or alternatively offer to the customer the
benefits of the Ideal Care Scheme details of which are
outlined in the householder pack supplied with this boiler.
After completing the installation and commissioning of the
system the installer should hand over to the householder
by the following actions:
1. Hand the User Instructions to the householder and explain
his/her responsibilities under the relevant national
regulations.
2. Explain and demonstrate the lighting and shutting down
procedures.
3. The operation of the boiler and the use and adjustment of
all system controls should be fully explained to the
householder, to ensure the greatest possible fuel
economy consistent with the household requirements of
both heating and hot water consumption.
Advise the User of the precautions necessary to prevent
damage to the system and to the building, in the event of
the system remaining inoperative during frosty conditions.
4. Explain the function and the use of the boiler heating and
domestic hot water controls.
5. Explain the function of the boiler fault mode.
Emphasise that if a fault is indicated, the boiler should be
turned off and a registered local heating installer
consulted. In IE contact a competent person.
6. Explain and demonstrate the function of time and
temperature controls, radiator valves etc., for the economic
use of the system.
7. A programmer is fitted so draw attention to the Users
Instructions and hand them to the householder.
INST
ALLA
TION