IDEAL FAST-WAY Si-Low 210 A1, Owner'S Manual

Page: 97 / 149

Cyclo® BBB4
Operation & Maintenance Manual
9
Cyclo® BBB4
Installation onto Driven Shaft,
continued
Taper-Grip® Bushing
Clean Driven
Shaft
2
Loosen socket head cap screws .
3
Remove (unscrew) Taper-Grip® bushing from the unit.
4
Clean all grease, oil and/or anti-seize paste from the driven shaft. Failure to do so
could result in damage to shaft.
Slide Taper-Grip® bushing onto driven shaft.
5
Inspect and test Taper-Grip® bushing on shaft.
• Check shaft for burrs, corrosion, or warpage . Repair or replace shaft
as necessary.
• Slide bushing back and forth along shaft, checking for surface irregularities
and fi t.
• Verify bushing is sized correctly for the shaft diameter.