IDEAL FAST-WAY Si-Low 210 A1, Owner'S Manual

Page: 146 / 149

Cyclo® BBB4
Cyclo® Portion Disassembly/Assembly,
continued
Reassembly Procedure
58
Operation & Maintenance Manual
Cyclo® BBB4
Code on
upper disc
Code on
lower disc
X
X
180 180ºº
4
Insert the top Cycloid disc so that the code engraved on its surface is 180° opposed
to the corresponding etched code on the lower Cycloid disc.
5
If the Cyclo® portion of the Cyclo® BBB4 unit is grease lubricated, refi ll the reduction
components with the amount specifi ed in Grease Quantities section of this manual;
or, fi ll to 80% of the space around the reduction mechanism and bearings of single
reduction units, and 50% of the space around the reduction mechanism of both the
fi rst and second stage of double reduction units.
If the Cyclo® portion of the Cyclo® BBB4 unit is oil lubricated – do not
add any grease during the reassembly process.
6
When reassembling the Cyclo® BBB4 gear housing onto the Cyclo® reduction stage,
ensure that the
carrier pins are inserted and aligned with the corresponding bores
of the rollers.