IDEAL 700 002, User Manual

Page: 4 / 19

HERDEGEN SNC 2, Rue Freyssinet 77500 CHELLES-FRANCE
08/08/2017 Rev. 1 (27/09/2017)
PREAMBLE
A prior reading of this guide will allow you to be aware of the characteristics and essential recommendations to use and optimally maintain
your transport chair IDEAL. Don’t use this transport chair before a prior reading of this manual. Always proceed with a general inspection of your
transport chair before use. If you are not certain of one of the aspects of your chair, please contact your closest distributor. As a certified profes -
sional, they will be able to advise you and check your transport chair before and after use.
SUMMARY
1. PURPOSE AND RE-USE OF THE CHAIR
1.1 Intended use
1.2 Indications and contraindications
1.2 Reuse & rental
2. CONDITIONS OF USE
2.1 Inspection before use
2.2 Indoor use
2.3 Outdoor use
2.4 Transport of the chair
2.5 Risks of pinching
2.6 Spare parts
3. RECEPTION AND DESCRIPTION
3.1 Reception
3.2 Product description
3.3 Installation
4. ADVICES FOR AN APPROPRIATE USE
4.1 Support belt
4.2 Braking
4.3 Locking of the backrest
4.4 Footrest adjustement
4.5 Stability in movement or stopped
4.6 Obstacle clearance
4.7 Transfer
4.8 Opening and closing of the chair
5. MAINTENANCE INSTRUCTIONS AND DAY-TO DAY ADJUSTEMENTS
5.1 Maintenance, adjustment and regular inspection
5.2 Storage and use conditions
5.3 Cleaning
6. ANNUAL MAINTENANCE, REPAIRS, WARRANTY
6.1 Inspections and repairs
6.2 Storage
6.3 End of life of the product
6.4 Warranty conditions
7. CHARACTERISTICS AND RECOMMENDATIONS
7.1 Essential characteristics of the chair
7.2 Recommendations
GENERAL SAFETY INSTRUCTIONS
• ALWAYS consult with your physician or supplier to determine proper adjustment and use of the device.
• Don’t store outside and don’t let under the sun (Beware : don’t let the product in a car in case of high outside temperature !!).
• Don’t use in extreme temperature (above 38°C or 100°F or below 0° or 32°F).
• Check carefully all parts of this item (screws, tubes, tips, grips..).
• Check regularly if all screws are tightened.
• Check before each use if the chair is in a perfect state.
• Use only as a transfer chair and in proper way : don’t knee or stand on the product, don’t seat on the armrests.
• ALWAYS observe the weight limit on the labelling of your product.
• After unfolding or assembling the transfer chair, make sure that it is securely locked in OPEN position and level to the ground before using.
• DO NOT hang anything on the chair.
• ALWAYS test to see that the walking aid and attachments are properly and securely locked in place before using.
• No modification must be made on this device. Use only original parts to replace the broken or defect one and let this be done by the technical staff.
• In case you didn’t use your chair for a long time, let it checked by the technical staff, before using.
• Be careful when using: beware holes and deformations in the floor.
• Be careful: risk of crushing and squeezing fingers when folding/unfolding.
• Any serious incident that has occurred in relation to the device shall be reported to the manufacturer and the competent authority of the Member
State in which the user and/or the patient is established.
• Lift the footplates up before getting in or out of the chair.
• Please note that redistribution of weight due to body movements or loading the wheelchair can increase the risk of tipping over.
• Avoid wheeling against obstacles (steps, kerbs) at speed or jumping down steps.
• Never stand on the foot plates to get in and out.