IDEAL 4855, Operating Instructions Manual

Page: 30 / 64

- 30 -
IDEAL 4855
•
IDEAL 5255
•
IDEAL 6655
T MANUAL
•
Operation
• •
Adapting a program when the printer’s
imprint deviates
•
Press PRG. RUN

"
Load program no.
"
appears.
•
Enter program number 01 ... 99, and with
2 x Enter proceed to Step 1.
•
Correct the cutting position of the backgauge
with the hand-wheel.
•
MODIFY V appears on the screen and the
measurement flashes.
•
To store press MODIFY .
•
Release a cut and turn the paper.
•
If the printer’s imprint deviates it can be
corrected during the first two cuts via the
hand-wheel – see above.
•
Correction is only possible during the first two
cuts.
•
After leaving the PRG. RUN mode the
original data is stored again.
Delete a step
•
Press PRG. EDIT .
•
Enter program number, confirm with Enter .
•
Select program step with the arrow keys
b
and
j
.
•
Scroll with STEP until "Delete step no."
appears, Press 2 x Enter .