14
TONE on M12 cable
1 On the first line, M12 is shown;
2. Selected pairs or pins are shown on the
second line;
3. On the third line, selected tone is displayed.
4. Up & Down keys and Pair or Pin are also
displayed on the last line.
TONE on M12 > RJ-45 cable
1 On the first line, M12 is shown;
2. Selected pairs or pins are shown on the
second line;
3. On the third line, selected tone is
displayed.
4. Up & Down keys and Pair (
12,26 or
auto
) or Pin are also displayed on the
last line. When sending tone in
M12>RJ45 mode, use the M12 port
on the IE Net™ PRO.
TONE on a 4-pair data cable
1. On the first line, RJ-45 is shown, a tone
is ready to apply to a 4-pair cable;
2. Selected pairs or pins are shown on the
second line;
3. On the third line, selected tone is
displayed.
4. Up & Down keys and Pair or Pin are
also displayed on the last line.
M12
TONE
1234
SEL Hi Tone
Pair or Pin
Press Up and Down arrow keys to select
pairs or pins to apply tone.
Press SEL key to choose any of the four
tone sounds: Tone 1, Tone 2, Hi Tone, Lo
Tone (choose Hi on pair and Low on pin).
Press Up and Down arrow keys to select
pairs or pins to apply tone.
Press SEL key to choose any of the four
tone sounds: Tone 1, Tone 2, Hi Tone, Lo
Tone (choose Hi on pair and Low on pin).
Press Up and Down arrow keys to select
pairs or pins to apply tone.
Press SEL key to choose any of the four
tone sounds: Tone 1, Tone 2, Hi Tone, Lo
Tone (choose Hi on pair and Low on pin).
M12>RJ45
TONE
1234
SEL Hi Tone
Pair or Pin
RJ45
TONE
12345678
SEL Hi Tone
Pair or Pin
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com
