Comfosplit IKARO HW
–
User and Installer manual
EN
© Ideal Clima - Page 41 of 68
13.2
STRUCTURE
Casing: made with self-extinguishing ABS, in white colour, glossy finishing with steel inserts.
Front panel: with display and receiver of signals from the remote control. It allows easy access to filters and
electrical panel.
Display: It indicates the temperature, as well as signals of possible failures.
Air filters: Filters are removable, washable and cleanable (see maintenance chapter).
Air deflector: It allows to orient the airflow.
Fan section: Motor with feedback inverter control. Backward blades Impeller. Three speeds.
Heat exchanger: Copper, with ½ "M and bleed valve.
Drain Pan: Plastic, with DN15 connection.
Fixing template: metal, mounted on each device.
Terminal Blocks: Protected by cover with screws, they are accessible for easy electrical connection.
13.3
OPERATION
Automatic
Once automatic operation is selected with
MODE
button on the remote control, (AUTO) appears on the
display. According to the ambient temperature TA, IKARO HW automatically chooses between cooling,
heating and dehumidification.
It is not recommended to use it to achieve comfort, it is preferable to select the mode directly: cooling,
heating or dehumidification
Once selected, the mode does not change when the room temperature changes, however by turning the unit
on and off, the operating mode can be selected again.
Cooling
The cooling temperature setpoint TS can be selected between 16 ° C and 32 ° C with the
SET
button on the
remote control, while the fan speed can be chosen with the
SPEED
key. IKARO HW operates as follows:
•
With manually selected fan speed:
o
TA-TS> 1 ° C: it opens the water valve while the fan runs at the programmed speed.
o
TA = TS: it opens the water valve, while the fan runs at the programmed speed. The previous
status is unchanged.
