EN
Comfosplit IKARO HW - User and installer manual
© Ideal Clima - Page 46 / 68
15.3
REMOTE CONTROL
FEATURES:
Batteries: n ° 2 AAA (1.5 V)
Infrared signal: 38 kHz
Maximum working distance under normal conditions: 5 m
Adjustment temperature range: from 16 ° C to 32 ° C
REMOTE BUTTONS
N.B. writings in bold are
located next to the
buttons, eg:
MODE
writings in brackets
appear on the remote
screen
eg (OFF)
ON / OFF:
It turns on and
off the machine.
MODE:
selects the mode of
operation. Each time the
button is pressed the
operating mode is
changed in sequence:
Automatic-cooling-
dehumidification-heating-
ventilation. The remote
display shows the
corresponding writing (AUTO) - (COOL) - (DRY) - (HEAT) - (FAN)
SET
(Middle button along with the symbols "UP" and "DOWN"): sets the temperature, in the range 16 ° C-32 ° C,
and the time, in the field 0,5h -24h for sleeping and timing functions.
SPEED:
selects the fan speed. Each time the button is pressed, the fan speed is changed in sequence: Low-
Medium-High-Automatic. The remote display shows the corresponding writing (LOW) - (MEDIUM) - (HIGH) -
(AUTO).
SWING:
It makes the deflector oscillate, when pressed a first time. It Stops the oscillation in the desired position
when pressed a second time.
SWING 2:
not used.
TIMER:
not used
SLEEP:
not used
FEELING:
When this function is active, Ikaro measures the temperature using the probe present in the
remote control itself. To activate the function, press the FEELING button, compare the temperature on the
display measured by the remote control, with eg. ROOM: (26 ° C ROOM). The temperature is transmitted by the
remote control to Ikaro at regular intervals of 1 minute, when this function is activated, guaranteed that the
remote control remains in view of Ikaro.
To deactivate this function, press the FEELING button again, compare the temperature value set next to the
term SET, eg. (25 ° C SETTING UP). The function is not active if IKARO HW is in FAN mode.
The Feeling function remains active as long as the appliance is switched on. If the appliance is switched off
with the key ON / OFF and then switched on again, the Feeling function will be required again.
SCREEN:
it turns ON or turns off the LCD display on board IKARO HW.
CLEAN, HEALTH, FUNGUSPROOF
: inactive
