iData 90UHF User Manual
- 21 -
5 Introduction to iScan
To collect data, you must install and start the scan application on the iData 90UHF. Wuxi
iData Technology Company Ltd. provides the embedded system component iScan, which
can send the data decoded by a barcode scanner to applications by simulating keypad
input. The iData products that are equipped with RFID modules are supported. These
products are used to detect compatibility of devices and demonstrate RFID applications.
5.1 Starting iScan
The iScan program is started by default after the system is started. You can also select
Start
>
iScan
to start iScan. After the iScan program is started, the iScan icon
is
displayed in the lower area of the iData 90UHF.
5.2 Using iScan
1. Click
. A menu is displayed.
2. Select the functions to be enabled. After a function is enabled,
is displayed in front of
the function.
Figure 5-1 iScan menu
5.3 Description of iScan Menu
Enable BarCode
This function supports barcode scanning and identification. The scanned barcode can be
simulated as keypad input and transmitted to the relevant application.
Enable RFID
This function supports reading IDs of RFID labels, decoding RFID labels and sending the
decoding results to the relevant application.
Summary of Contents for 90UHF
Page 1: ......
Page 3: ...7 1 Precautions 29 7 2 Troubleshooting 30 Appendix 33...
Page 36: ...iData 90UHF User Manual...
