iData 90UHF, User Manual, Page: 32 / 36

iData 90UHF User Manual
- 32 -
Fault Cause Solution
unavailable.
A message is displayed,
showing that the AP is
being connected.
The DHCP function is not enabled on the
AP/router and the IP address cannot be set.
In this case, set the IP address manually.
The password of the WLAN device is
incorrect.
Too many devices access the AP at the same
time. In this case, restart the AP.
When WLAN is in Adhoc mode, modify the
advanced setting of WLAN to Access Point
only .
The password mode of the AP is incorrect. In
this case, change the password
authentication mode.