Innovative Circuit Technology Ltd.
39
Firmware Update
Download the latest Digital Series 2 firmware file from the ICT
website (ict-power.com) to your local computer. De-compress this
.cry
file then press the Update Firmware button, and link to this file.
Update the firmware on the power supply by clicking the Update Now
button. Note that the system settings will not be changed. Do not
remove AC power during the update process!
Send Test E-Mail
Pressing the Send Test E-mail
button will send test e-mail to the
specified recipient using the e-mail settings on the Network Setup
page.
Ping Diagnostics Tool
Use this feature to verify connectivity of any network connected device.
Enter the hostname or IP address of the target device, and then click
the Ping button to check if the device is active.
5.10. Router Configuration
This section explains how to set up the embedded Web server
interface behind a router and enable remote access to the panel over
the Internet.
A router allows multiple PCs to share a single Internet connection. To
enable access to the Web server over the Internet, you will need to
configure your router to forward incoming remote data to the local IP
address of your power supply.
The following steps use a Linksys WRT54G router as an example:
1.
Log in to your router and go to the port-forwarding screen. In the
Linksys WRT54G, this is located in the Applications and Gaming
tab. The location of port forwarding may be different on other
routers (consult your router manual for instructions).
2.
To configure HTTP forwarding, following these steps:
a. Enter a unique name in the Application
field.
b. Enter the HTTP port number that the power supply is using in
the
Start
and
End
fields. If you are using the default power
supply port settings, the port number is
80
.
c. Select Both
under Protocol
(TCP and UDP).