Innovative Circuit Technology Ltd.
16
PARALLEL SETTINGS SCREEN
PARALLEL SETTINGS
MODE: STANDALONE
DEVICE ID:
0
UNITS IN PARALLEL:
0
See the
Smart
Parallel Operation
section for more information on
configuring the parallel settings. (This screen is only shown if parallel
connected units detected.)
Parallel Mode:
Modifies the parallel mode setting. It has 3 options:
Standalone: Single Unit.
Slave and Master: Parallel Units, select one unit in a set
as the Master, set others as Slave
Device ID:
Modifies the parallel device ID setting. Ranges from 0 5.
Give each unit in a parallel set a unique ID number.
Units In Parallel:
If parallel operation is active, the total number of
parallel units is displayed on this line. If parallel operation is not
active, the display will show blank. Up to 6 Units can be connected in
parallel corresponding to the value 0 5.
COMM SETTINGS SCREEN
COMM SETTING
NETWORK STATUS
VIEW DEVICE NAME
RESET COMM SETTINGS
View the COMM SETTINGS screen the check the network IP
address and other parameters.
Network Status:
Displays the network status, the IP address
assigned to the power supply, and the units MAC address.