Innovative Circuit Technology Ltd.
19
Duration:
Set the maximum time (in minutes) for the equalize
charge to be applied, as recommended by the battery
manufacturer.
Status:
Set to Start, to begin an equalize charge when the
battery is fully charged. (Status will be READY if battery is fully
charged. Status will show IN PROGRESS when the equalize
charge is occurring)
Interval:
Set the time (days) to enable an automatic equalize
charge after each interval time. Default interval is 0 days,
disabling this feature.
BATTERY STATUS SCREEN
View this screen to see the battery Voltage, the battery Current (+ for
charging, - for discharging), and if the battery is Connected via the
LVD contactor.
3.4. Control Panel Menu Password Reset
This procedure clears the Control Panel menu password and allows
you to set a new password if needed. To clear the password, do the
following:
1.
Turn the Power Switch to the OFF position.
2.
Press and hold down the Back and Enter keys. Turn the Power
Switch to the ON position while holding the keys down. Continue
holding the keys down for 15 seconds until the System Status
screen is displayed on the Control Panel display.
3.
Release the Back and Enter keys. You will no longer be
prompted for a password on any of the Control Panel screens.
4.
In order to set a new password see SECURITY SETTINGS
SCREEN on page 15.