![background image](http://html1.mh-extra.com/html/ics/sb586t/sb586t_product-manual_3539048017.webp)
Manual Number: 00431-220-5
Page 2-2
S586T Series Manual
J3: Floppy Drive Connector
34-pin dual row header, Amp 103308-7
The J3 connector supplies the signal from
an onboard diskette drive controller for one
or two diskette drives.
1 GND
18 DIR#
2 DRVEN0
19 GND
3 GND
20 STEP#
4 N/C
21 GND
5 GND
22 WRDATA#
6 DRVEN1
23 GND
7 GND
24 WRGATE#
8 INDEX#
25 GND
9 GND
26 TRK0#
10 FDME0#
27 GND
11 GND
28 WRPROTECT#
12 FDSEL1#
29 GND
13 GND
30 RDDATA#
14 FDSEL 0#
31 GND
15 GND
32 HDSEL#
16 FDME1#
33 GND
17 GND
34 DSKCHG#
J4: Parallel Port Connector
26-pin dual row header, Amp 103308-6
The J4 connector allows the use of parallel
devices, typically printers. Your SB586T will
be delivered with this port already connected
to a slot filler bracket for easier access.
1 STROBE#
14 GND
2 AUTOFEED# 15 DATABIT 6
3 DATABIT0
16 GND
4 FAULT#
17 DATABIT 7
5 DATABIT1
18 GND
6 INIT#
19 ACK#
7 DATABIT2
20 GND
8 SLCTIN#
21 BUSY
9 DATABIT3
22 GND
10 GND
23 PERR
11 DATABIT4
24 GND
12 GND
25 SELECT
13 DATABIT5
26 N/C
J5: COM2
10-pin dual row header, Amp 103308-1
The J5 connector is the second system se-
rial port, which allows the use of serial de-
vices or serial communications.Your
SB586T will be delivered with this port al-
ready connected to a slot filler bracket for
easier access.
1 CD
6 CTS
2 DSR
7 DTR
3 RX
8 RI
4 RTS
9 GND
5 TX
10 N/C