2 Start-up
3
MultiHandy 2025
Q
ui
ck
G
ui
de
•
Ve
rs
io
n
1.
0
2 START-UP
2.1 Charging measuring instrument
The batteries of the measuring instrument must be
charged before it is switched on for the first time.
How to charge the measuring instrument
1
Remove the battery protective strips from the bat-
tery compartment.
2
Connect the country adapter for the respective
country to the USB power supply.
3
Connect the USB cable to the power supply.
4
Plug the power supply into a socket.
5
Connect the USB cable to the measuring instru-
ment.
6
Let the measuring instrument battery charge unin-
terrupted for 12 hours.
7
Remove the USB cable from the measuring in-
strument.
8
Remove the power supply from the socket.
2.2 Basic settings
After you have charged the measuring instrument,
you can switch it on. When you switch on the measur-
ing instrument for the first time, you are requested to
define the basic settings.
How to define the basic settings
1
Press
[F4]
to switch on the measuring instrument.
2
Use
[F1]
or
[F2]
to select the desired menu lan-
guage.
Save your entry by pressing
[F4]
.
3
Confirm your selection with
[F3]
.
4
Use
[F1]
to select your desired units of measure-
ment.
Save your entry by pressing
[F4]
.
The display shows the firmware version number
and serial number of the measuring instrument.
The display then shows the calibration notice.
5
Use
[F4]
to exit the calibration notice.
The measuring instrument is ready.
