Auto Sentry® Petro - Installation Guide
25
System Wiring
CHAPTER 3: System Wiring
The Auto Sentry® Petro’s main power input is wired to the terminal block which is located inside
the top of the Auto Sentry® Petro, along with the heat exchanger.
All wiring must follow the recommended “Auto Sentry® Petro Power
See “Recommended and Accepted Grounding Methods” on page 7.
Warning Symbol
The Warning Symbol symbol (in this manual, on equipment, or hardware) indicates you should
consult accompanying documentation before proceeding. The warning symbol is below:
Figure 19. Power Terminal blocks inside the Auto Sentry® Petro
!
WARNING:
The terminals and power supplies
contained in the Auto Sentry® Petro
enclosure are for the ICS Equipment Only!
Connecting external components and
wiring to the Auto Sentry® Petro power
circuits can damage the circuit boards and
components and WILL VOID THE
WARRANTY.