Auto Sentry® Petro - Installation Guide
15
Molded Plastic Installation
CHAPTER 2: Molded Plastic Installation
The Auto Sentry® Petro is designed to be rugged from the inside out. The heart of this design is a
solid stainless steel metal cabinet with full air conditioning. The durable roto molded plastic
surrounds and protects the metal cabinet core and gives the Auto Sentry® Petro a fresh new style.
Brand vinyl with your logo and graphics to make the Auto Sentry® Petro your own.
After the J bolts have been set in the concrete according to your site plan, the installation of your
Auto Sentry® Petro can begin.
Attaching the Auto Sentry® Petro to the J Bolts
If your site does not have a raised curb, contact ICS to order a riser to place your Auto Sentry®
Petro upon. The riser gives the Auto Sentry® Petro the proper height that is necessary to deliver to
your customers who are inside their vehicles the most ergonomic, easy to reach experience at the
Auto Sentry® Petro payment terminal. Before you go any further, there needs to be (4) or (8) J bolts
set in concrete according to your site’s layout. The first four J bolts are standard, see Figure 6. If
available, the extra four J bolts simply provide added security but are not necessary.
Items Needed
(site provided): 3/8” J bolts, nuts, and washers to attach the base.
Figure 6. J bolts in base of Auto Sentry® Petro
1.
Run the power cable and two Cat 6 cables (the 2nd Cat 6 cable is for EMV only) to the Auto
Sentry® Petro and pull up them up through the center of the Auto Sentry® Petro’s pedestal.
2.
As you line up the J bolts to the holes in the base of the Auto Sentry® Petro, place the Auto
Sentry® Petro on top of the concrete.
3.
Tighten (4) or (8) nuts and (4) or (8) washers to the J bolts.
NOTE:
If using (4) J bolts in your concrete, attach #1-4 (Figure 6). Using 8 bolts is optional. If using
(8) J bolts in your concrete, attach #1-8 (Figure 6).