3-17
3
Keyword
Default
Description
Value
TABLE 3-3 SCPI COMMANDS AND QUERIES
(CONTINUED)
CALibrate
Starts calibrate branch
:IDN <string>
Sets user IDN message. String is up to
72 characters and consists of four fields
(manufacturer, model code, serial num-
ber and firmware revision) separated by
commas. e.g.
ICS Electronics, 8099, S/N
711012, Rev 00.00, Ver 07.11.01.
:DATe <date>
Saves IDN message and date. The save
operation lights all the LEDs. Date is in
mm/dd/yy format.
:DATe?
Queries the calibration date. The response
is 00/00/00 when the unit is not calibrated.
Enter a valid date to indicate when the unit
is calibrated or configured.
DEFault
Sets Flash memory to factory settings.
Does not reset the VXI-11 parameters.
:LOCK
0
Disables configuration commands when
On. Values = 0|1 or OFF|ON. Table 1-3
lists the locked commands.