2-9
2
Highlight Internet Protocol (TCP/IP) and click Properties. If your
PC’s IP address is in a different range, record the current settings and
temporarily set the following network values:
Check
‘Use the following IP Address’
IP Address
192.168.0.2
Subnet mask
255.255.255.0
4.
Run the VXI11_config program. The Configuration Utility opens a
window as shown in Figure 2-9. Initially only the Find Server, Help
and Exit buttons are enabled on the program window. The other but-
tons will be enabled as you advance through the program.
5.
Click on the
Find Server
button. The program scans for all VXI-11
Services connected to the local LAN or to your PC. (The 8099 is an
RPC server which provides a VXI-11 Service) The results are displayed
in the Results box.
Figure 2-9 VXI-11 Configuration Utility
(Showing network and configuration choices with no changes)
