A-46
A4
C.21 reload_factory
The reload_factory procedure is used to cause the Edevice to reset the default
configuration back to factory loaded defaults. Any/all modifications to the default
configuration are lost as a result. Note that dynamic in-memory configuration
settings are not modified until a reload_config or reboot is executed.
struct Reload_Factory_Resp {
unsigned
int
error;
};
Reload_Factory_Resp reload_factory (void) = 21;
If the RPC message is of insufficient length to satisfy the required length, an
error value of 1 is returned.
The returned Reload_Factory_Resp.error value determines whether the Edevice
has reset the default configurations to the factory default settings.
error Meaning
0
No error
1
Syntax error