![background image](http://html2.mh-extra.com/html/ics/680gc/680gc_service-manual_3546494034.webp)
33
© 2011 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 525747 REV12Sep2012
680GC SERVICE MANUAL
8. STARTER
8.1
Remove starter cover screws (4).
8.2
Remove starter cover assembly from saw.
8.3
Remove starter cord shield screws.
8.4
Relieve spring tension.
A. Pull 4-6" (10-15 cm) of rope out.
B. Line rope up with notch on pulley.
C. Slowly rotate pulley counter-clockwise
until spring pressure is released. Use thumb
as brake.
8.5
Remove starter pulley screw and washer.
NOTE:
Hold starter cover firmly.
8. This section covers the removal of the starter cover, replacement of the starter rope, and
replacement of the recoil spring.