36
© 2011 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 525747 REV12Sep2012
680GC SERVICE MANUAL
8. STARTER
8.14
Wind the recoil spring.
A. Line rope up with notch on pulley.
B. Rotate the pulley with the rope clockwise
5 times.
C. Untangle rope and release.
8.15
Assemble starter cord shield.
8.16
Remove starter pawl screws, pawls, spring
and plain washer.
NOTE: Piston stop tool may be required to
remove the starter pawl screws.
8.17
Inspect and clean pawl components.
A. Inspect the components. Replace if
necessary.
B. Clean the components with a brush and
solvent.
