57
© 2011 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 525747 REV12Sep2012
680GC SERVICE MANUAL
13. CYLINDER & PISTON
13.28
Install carburetor base screws.
A. Use Loctite
®
242 on (3) screws without
ground wire.
B. Make sure to include stop switch wire
(installed on left rear screw).
C. Torque to 35 in-lbs. (4 Nm).
13.27
Install carburetor base.
A. Slip pulse tube into and through
carburetor base.
B. Slip rear manifold into and through
carburetor base.
C. Make sure rear manifold lip is flat.
