Q03 : How to map HART device CMD(3) data directly to SCADA or HMI ?
A03:
(1) Make sure that the communication between HRT-710 and HART device is ok. (Refer to
the steps of Q02)
(2) Set “Swap Mode” of system setting in HRT-710 to be “W&B”.
[1] In “Device Configuration” screen, right click the button of mouse on “System” item and
click the “Edit” option to open “System Edit” screen like Figure 3-1.
Figure 3-1 Open “System Edit” screen
[2] Set the “Swap mode” item to be “W&B” and click “OK” button like Figure 3-2.
HRT-710 / HRT-310 User Manual
Version 1.31
Page
：
84
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]