HRT-710 / HRT-310 User Manual
Version 1.31
Page
：
50
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
Node
Behavior
Data
Retry count: 0~5
[ Modbus: ]
Port num: 0~3
Baud rate (bps): 1200~115200
Data bits: 7/8
Stop bits: 1/2
Parity: None/Odd/Even
Protocol: Modbus RTU Slave /Modbus ASCII Slave
Net ID: 1~247
Swap mode: None, Byte, Word, W&B
System right
click
Include the below two options:
1. Basic Operation:
Read/Write module information by using window
option.
2. Advanced Operation:
Read/Write module information by using address
mapping.
Module click
Module name: Module
Channel: 0
Auto Configuration: Enable/Disable
Network: Point to Point / Multi-drop
(Preamble length: 5~20)
(Master type: Primary/Secondary Master)
(Frame type: Short/Long Frame)
(Module address: 0~15)
(Auto Get Unique ID: Enable/Disable)
(Manufacturer ID: 1 byte)
(Device type: 1 byte)
(Device ID: 3 bytes)
Default Command(0): Disable/Initial/Polling
Default Command(3): Disable/Initial/Polling
Default CMD
click
Module name: Default CMD
Module index: 0~15
Command num: 0~255
Command mode: Initial/Polling
Command format: Normal/Simple
Command in size: 2~255
Command out size: 0~255
Command in address
Command out address
Default CMD
right click
Include the below two options:
1. Basic Operation:
Read/Write the Default CMD data by using window
option.
2. Advanced Operation:
Read/Write the Default CMD data by using address
mapping.
User CMD
click
Module name: User CMD
Module index: 0~15
User command index: 0~99
Command num: 0~255