(2) Right click on the “UserCMD(6)” item and choose the “Basic Operation”.
(Figure 12-3, in the demo, the command index is 0 for the UserCMD(6).
(3) Input the HART device address value and click the “Send” button.
(Figure12-4, in the demo, HART device address will be set to be 2. Now the setting
value is just saved in HRT-710 not sent out yet.)
Fiugre 12-3 The “Basic Operation” of UserCMD(6)
Figure 12-4 The “I/O Data” screen of UserCMD(6)
(4) Right click on the “System” item and choose the “Basic Operation”.
(5) After finish the below settings, click “Send Data” button to send the UserCMD(6) to
HART device. (Figure 12-6)
[1] “Auto Polling” field => “Disable”
[2] “Manual Trigger” field => “Enable”
[3] “Trigger Index of User Command” field => Input “0” (UserCMD(6) Index)
Figure 12-5 The “Basic Operation” of System
HRT-710 / HRT-310 User Manual
Version 1.31
Page
：
119
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]