ICP DAS, ZT-2017 and ZT-2017C AI Series User Manual, Version 1.0.1
Page 63
Copyright © 2012 by ICP DAS Co., Ltd. All Rights Reserved.
6.2.19
~AA1
Description
This command is used to reset the status of the Host Watchdog timeout for a
specified module.
Syntax
~
AA1[CHECKSUM](CR)
~
Delimiter character
AA
The address of the module to be reset in hexadecimal format (00 to FF)
1
The command to reset the status of the Host Watchdog timeout
Response
Valid Command
!AA[CHECKSUM](CR)
Invalid Command
?AA[CHECKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples
Command
~
030
Response !0304
Reads the status of the Host Watchdog for module 03 and returns a response
indicating that the command was successful, and that a Host Watchdog timeout
has occurred.
Command
~
031
Response !03
Resets the status of the Host Watchdog timeout for module 03 and returns a
response indicating that the command was successful.
Command
~
030
Response !0300
Reads the status of the Host Watchdog for module 03 and returns a response
