ICP DAS, ZT-2017 and ZT-2017C AI Series User Manual, Version 1.0.1
Page 33
Copyright © 2012 by ICP DAS Co., Ltd. All Rights Reserved.
6.2.2
Overview of the DCON Command Set
General Command Set
Command
Response
Description
Section
%AANNTTCCFF !AA
Sets the Module Configuration
6.2.3
#AA
>(Data)
Reads Data from the Analog Inputs
6.2.4
#AAN
>(Data)
Reads Data from the Analog Input of a
Channel
6.2.5
$AA0
!AA
Performs a Span Calibration
6.2.6
$AA1
!AA
Performs a Zero Calibration
6.2.7
$AA2
!AANNTTCCFF Reads the Module Configuration
6.2.8
$AA5
!AAS
Reads the Reset Status of the Module
6.2.9
$AA5VV
!AA
Enables/Disables each Channel
6.2.10
$AA6
!AAVV
Reads the Enabled/Disabled Status of
each Channel
6.2.11
$AA7CiRrr
!AA
Sets the Type Code of a Channel
6.2.12
$AA8Ci
!AACiRrr
Reads the Type Code of a Channel
6.2.13
$AAF
!AA(Data)
Reads the Firmware Version of the
Modeule
6.2.14
$AAM
!AA(Data)
Reads the Name of the Module
6.2.15
$AAS1
!AA
Reloads the Default Calibration
Parameters
6.2.16
~AAEV
!AA
Enables/Disables Calibration
6.2.22
~AAO(Name)
!AA
Sets the Name of the Module
6.2.23
@AACH
!AA
Clears the High Latch Values for all
Channels
6.2.24
@AACHi
!AA
Clears the High Latch Value for a
Specific Channel
6.2.25
@AACHCi
!AA
Clears the High Latched Alarm for a
Specific Channel
6.2.26
@AACL
!AA
Clears the Low Latch Values for all
Channels
6.2.27
@AACLi
!AA
Clears the Low Latch Value for a
Specific Channel
6.2.28
@AACLCi
!AA
Clears the Low Latched Alarm for a
Specific Channel
6.2.29
