![background image](http://html1.mh-extra.com/html/icp-das-usa/touchpad-tpd-series/touchpad-tpd-series_programming-manual_3682250062.webp)
TPD/VPD Series - Getting Started v.1.0.5
Page 58
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: [email protected]
either the “spacebar” or “P” on the keyboard to change the type for “V1” to “P”
(Positive). Repeat the procedure to change the Coil types to “S” (Set). (Refer to Step 4
f.
In the designer window, select the 2
nd
rung, then click the “Space [T]” button or press
either the “spacebar” or “N” on the keyboard to change the type for “V1” to “N”
(Negative). Repeat the procedure to change the Coil types to “R” (Reset).
Step 3: Edit the “Saving Mode” Ladder program.
Description: When clicking this button, the lights for DO5~7 will turn on and the lights
for DO0~4 will turn off. Clicking the button for a second time will turn all
the lights off.
a.
Using the same procedure as that described in Step 2, create the rungs for the “V2”
Switch and Coils. (3
rd
and 4
th
rungs)
b.
In the designer window, select the 3
rd
rung, then click the “Space [T]” button or press
either the “spacebar” or “P” on your keyboard to change the type for “V2” to “P”
(Positive). Repeat the procedure to change the types for DO0~4 to “R” (Reset) and
DO5~7 to “S” (Set).
c.
Use the same procedure as described in b to set the types for the 4
th
rung, but set the
“V2” Switch to “N” (Negative) and the Coils to “R” (Reset).
2
nd
Ladder
1
st
Ladder