TPD/VPD Series - Getting Started v.1.0.5
Page 38
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: [email protected]
e.
Enter a device name or click the “Assign Device Name” button to have a name
assigned by the system.
f.
Repeat the steps above to add details for the I-7018Z I/O module (
Net ID = 2
)
.
Step 4: Create the light display/control. (This demo uses 8 DI/DOs)
a.
Click the “Libraries” tab on the right hand side, and select the type of
you want to use
.
b.
Select and drag the I/O tag you want to connect to from the left hand side into the
frame.
c.
Repeat the steps above to drag
DI
0 ~7 and
DO
0 ~7 into the HMI frame.
a.
b.
c.
