TPD/VPD Series - Getting Started v.1.0.5
Page 54
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: [email protected]
Step 5: Create the light display/control.
Follow the same procedure as that described in Step 4 of
in Demo 2 to
create eight DI/DO lights.
Step 6: Create the temperature display. (This demo uses AI0)
Follow the same procedure as that described in Step 5 of
in
Demo 2 to
create a “Slider” component (Set the Max value to 1000, as the reading of the K-type
thermocouple sensor (wire) only allows 3 digits to be displayed for the Modbus I/O) and a
“Label” component (“TagName”= AI0) to display the temperature value.
