![background image](http://html1.mh-extra.com/html/icp-das-usa/touchpad-tpd-series/touchpad-tpd-series_programming-manual_3682250035.webp)
TPD/VPD Series - Getting Started v.1.0.5
Page 31
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: [email protected]
b.
The following properties can be modified from the Properites Inspector area on the
right hand side:
Alignment
: Sets the text alignment position in the display box of the “Label”
component.
FillColor:
Sets the fill color for the display box of the “Label” component.
Font:
Sets the font for the text in the display box.
Height:
Sets the height of the display box.
ID:
A unique ID number to identify different entities of the same type in the design.
Left:
Sets the X-coordinate of the top left corner of the display box.
Name:
The type name of the component.
OutlineColor:
Sets the outline color of the display box.
Text:
Sets the text to be displayed in the display box.
Top:
Sets the Y-coordinate of the top left corner of the display box.
Width:
Sets the width of the display box.
Step 8: Configure the properties of the “Timer” component.
a.
Select the “Timer6” component in the design area as shown in the picture below.
b.
Set the “Interval” property in the Properties Inspector area. The units are milliseconds
(ms), so if the control function is to be executed every 1 second, set the value as
“1000”.
a.
b.