Tiny Serial-to-Ethernet Device Server
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
43 -
4.3.4
Remote Firmware Update
Firmware update requires initialization and local network operations. Traditional firmware update
requires adjusting the Init/Run Switch and reboots the module manually for the initialization of
firmware update, while new firmware allows user to initialize the module via web interface without
adjusting the hardware switch. Initialization via web is useful when module is installed in remote
site and can be accessed by a remote PC via TeamViewer.
Note: If the remote firmware update is failed, then the traditional firmware update (Local) is
required to make the module working again.
For detailed information regarding how to use this function to update the Firmware for your tDS-
700 series module, refer to the
tDS_Firmware_v138_and_later_Update_vxxx_en.pdf.
The location
of the user manual on the CD and the download address are shown below:
CD:\\ NAPDOS\tDS-700\Firmware\
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/tds-700/firmware/
