Tiny Serial-to-Ethernet Device Server
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
29 -
3.
Enter the network settings information, including the
IP, Mask and Gateway
addresses
,
and then click
“
OK
”
button. The new settings for the tDS-700 will take effect within 2
seconds. If you don
’
t know the correct network configuration information, contact your
Network Administrator to obtain the details.
Step 4: Configuring the Virtual COM Ports
1.
Wait 2 seconds and then click the
“Search Servers”
button again to ensure that the tDS-700 is
working correctly with the new configuration.
Note that the tDS-700 display name is
“
_RevB
”
for the M4 version module.
Click your tDS-700 in the list
