Tiny Serial-to-Ethernet Device Server
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
14 -
2.4
Appearance
4.
Operating Mode Switch
Init Mode:
Configuration mode
Run Mode:
Firmware operation mode
For tDS-700 series modules, the operating mode switch is set to the
Run
position by default. In order to update the firmware for the tDS-700 series
module, the switch must be moved from the
Run
position to the
Init
position. The switch must be returned to the Run position after the update
is complete.
Front View
1.
Robust Insulated and Fire-retardant Case
2.
Serial COM Ports
The number of serial COM Ports available
depends on the type of tDS-700 series
module. For more detailed information
regarding the pin assignments for the
Serial COM ports, refer to
Section 2.6 Pin
Assignments
.
3.
S1: System LED indicator
Once power is supplied to the tDS-700
series module, the system LED indicator
will illuminate. An overview of the LED
functions is given below:
Function
System LED Behavior
Running Firmware
Steady ON
Network Ready
Slow flashing
–
Once every 3 seconds
Serial Port Busy
Rapid flashing
–
Once every 0.2 seconds
