ICP DAS PMC/PMD Series User Manual
208
Figure11-28 :
Coil Output action setting page
Follow the steps below:
i
Select the module and address of the Coil Output from the
dropdown list of the “Module & Address” section.
ii
Specify the output value of Coil Output from the dropdown list
of the “Status” field. The output value can be “OFF” or, “ON”.
iii
Specify the “Frequency” to be “One-Time” or “Repeat”.
iv
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.2.2.2
Holding Register
You can execute an action to change the value of Holding Register
in the THEN/ELSE Action statement; the editing page for Holding
Register Action is shown as follow:
Figure11-29 :
Holding Register action setting page
Follow the steps below:
i
Select the module and address of the Holding Register from
the dropdown list of the “Module & Address” section.
ii
Specify the Operator in the “Operator” field. The 3 operators
are as follow
:
“=”
:
Indicate assign the new Holding Register value as the
value in “Value” field.
“+=”
:
Indicate assign the new Holding Register value as
the original Holding Register value plus the value in
“Value” field.
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...