ICP DAS PMC/PMD Series User Manual
192
Figure11-8 :
Input Register condition setting page
Follow the steps below:
i
Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the “Module &
Address” section that you are going to include its value in the
IF condition statements.
ii
Set up the expression statement for this Input Register address
value. Select an operator from “=”,”>”,”<”,”>=” or “<=”.
iii
And then specify the evaluation value. If this Input Register
value match the evaluation criteria, the result of this condition
evaluation will be “true”.
iv
PMC/PMD provides 7 value options; you can compare them
with the Input Register value for condition evaluation. Please
refer to “
” section for more detailed information for
comparison value settings of these 7 options.
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.1.2.4
Holding Register
Holding Register channel value from Modbus TCP/RTU Slave
module can be included in the IF condition statements; the editing
page for Holding Register Condition Setting is shown as below:
Figure11-9 :
Holding Register condition setting page
Follow the steps below:
i
Specify the module and address of the Modbus TCP/RTU
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...
