ICP DAS PMC/PMD Series User Manual
168
added SNMP Trap.
ix
To remove a pre-set SNMP Trap, please click the radio button in front
of the pre-set SNMP Trap and then click “Remove”.
x
After you finishing all the SNMP Traps creation and setting, click
“Save” button to save the settings.
10.4
LINE Notify Setting
PMC-52xx/PMD provides LINE Notify message sending function. With
this function, PMC-52xx/PMD can send messages to LINE personal
account or group chat rooms via LINE Notify official account. To send the
LINE Notify message, users have to apply a LINE Notify service first and
connect the service with the personal account or chat room to be sent.
Please refer to the LINE Notify guide webpage on PMMS official webpage
for the application and connection of LINE Notify service. The
configuration page for LINE Notify message setting and chat room setting
is shown as below.
10.4.1
Message Setting
I
n the Message setting page, users can edit the LINE messages with
pre-input strings and realtime data. The configuration page is shown as
below:
Figure10-20 :
LINE Notify Message Setting page (1)
The settings steps are as below:
i.
Make sure the “Message” Tab is selected.
ii.
Click “Add new message”, the LINE Notify Message Setting
page will appear as following:
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...
