ICP DAS PMC/PMD Series User Manual
108
Type: Select the output signal type of the AO channel from the
dropdown list.
After all settings are completed, click “OK” button to save the
changes and return to Modbus RTU Module List.
Please note: To set up the Power On value of the AO channels on
M-7000 modules, please use DCON Utility to set the value.
7.3.6
Modbus RTU Module Setting
PMC/PMD allows connections to modules that support Modbus RTU
Slave protocol for offering I/O interface function. Through Modbus
RTU protocol, it enables to read or write 4 types of Modbus data (Coil
Output, Discrete Input, Input Register and Holding Register) from the
Modbus RTU Slave modules. And by PMC/PMD IF-THEN-ELSE rule
engine, it allows to perform automation control operation on the
modules. And with SCADA software, it also allows monitoring and
control of the Modbus RTU modules which connect with the
PMC/PMD. The Modbus RTU Slave Module setting page is shown as
follow:
Figure7-42 :
Modbus RTU Slave Module Setting Page
The settings are as below:
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...
