ICP DAS PMC/PMD Series User Manual
199
Figure11-18 :
Timer condition setting page
Follow the following steps:
i
Select the timer that you are going to use its status as evaluation
criteria for IF condition statement. Specify the timer from the
dropdown list of the “Timer” field.
ii
Define the evaluation criteria of the timer status in IF statement to
be “Not timeout” or “Timeout”. If the timer status match the
evaluation criteria, the result of this condition evaluation will be
“true”.
iii
Click “OK” button to save the settings. The popup window will be
closed and return to the Rule settings page.
11.1.9
Schedule
The Schedule can be used as evaluation criteria for IF condition
statement; the editing page for Schedule Condition Setting is shown as
follow:
Figure11-19 :
Schedule condition setting page
Follow the steps below:
i
Select the Schedule that you are going to use for IF condition
statement from the dropdown list of “Schedule” field.
ii
The “Status” field must be “In Range”. If the system time of the
PMC is in the range of date/time setting of the schedule, the result
of this condition evaluation will be “true”.
iii
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.1.10
Mobile Network Signal Strength
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...
