ICP DAS PMC/PMD Series User Manual
119
2 continuous Holding Register data in the setting, and the data
type is “32-bit Floating Point”. So that these retrieved Holding
Register data will be kept in PMC/PMD Address 40300 and
40302.
Figure7-50 :
Input Register Setting Example for Modbus RTU Module
To modify the starting address or quantity setting, please click
on the setting block to perform the modification. The user could
also modify Type, Scale Ratio, Offset and Deadband on this
interface. For more detailed information, please refer to above
section “The Input Register Setting of Modbus RTU Module”.
If the user wants to assign a Nickname for the address blocks,
the user can click on the “Nickname Setting” tab, and then input
the Nickname for each address block. The Nickname will be
shown in the “I/O Information” and “Rule Setting” pages.
After all Holding Register settings of the Modbus RTU module
are completed, click “OK” button to save the changes.
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...
