PISO-DNM100 DeviceNet Master API functions User’s Manual (Ver: 1.0) 2008/02/25
42
4.1 DLL Function Definition and Description
All the functions provided in the DNM100.dll are listed in the following
table and detail information for every function is presented in the next sub-
section. However, in order to make the descriptions more simply and clear,
the attributes for the both the input and output parameter functions are given
as
[input]
and
[output]
respectively, as shown in following table.
Keyword
Set parameter by user before
calling this function?
Get the data from this parameter
after calling this function?
[ input ]
Yes No
[ output ]
No Yes
Table 4.1.1 Functions Table (Board Functions) 1/1
T
No.
T
T
Function Name
T
T
Description
T
1
DNM100_GetBoardInf
Get the information of the PISO-DNM100
2
DNM100_TotalDNM100Board
Get total PISO-DNM100 boards in the PC
3
DNM100_ActiveBoard
Make PISO-DNM100 active
4
DNM100_CloseBoard
Close the PISO-DNM100
5
DNM100_GetDLLVersion
Get the DLL version of the DNM100.DLL
Table 4.1.2 Functions Table (Firmware Functions) 1/1
T
No.
T
T
Function Name
T
T
Description
T
1
DNM100_GetFirmwareVersion
Get the version of the firmware inside the
PISO-DNM100
2
DNM100_ResetFirmware Reset
the
firmware in the PISO-DNM100
3
DNM100_CheckFirmwareMode Get the firmware mode at present