PISO-DNM100 DeviceNet Master API functions User’s Manual (Ver: 1.0) 2008/02/25
133
5.4 VC_Demo2 Introduction
VC_Demo2 is the example used for scanning the DeviceNet slave devices
in the network. The screen shoot is shown as Figure 5.4. This demo program is
designed to operate the master step by step. This program will show the
information of all the slave devices in the network. Before exercising this demo,
the users should have at least one DeviceNet slave device and finish the wire
connection between the Master and slave device. (See Figure 5.1)
Figure 5.4 The screen shoot of VC_Demo2
After running the program, the uses will see the “TotalBoard” information
on the left and up corner of the screen. This function determinates how many
PISO-DNM100 in your PC automatically. If it doesn’t find any board, the users
should check that the windows driver has been installed successfully.
Otherwise, if it has found at lease one board, the users can continue exercising
the demo program.
U