![background image](http://html1.mh-extra.com/html/icp-das-usa/piso-dnm100-d/piso-dnm100-d_user-manual_4476349014.webp)
PISO-DNM100 DeviceNet Master API functions User’s Manual (Ver: 1.0) 2008/02/25
14
1.6 Features
U
Hardware Features
z
PCI BUS interface.
z
Driver supported for Windows 98/ME/NT/2000/XP.
z
186 compatible CPU with DeviceNet firmware inside.
z
8K bytes DPRAM inside.
z
One CAN communication port.
z
Compatible with CAN specification 2.0 parts A and B.
z
Jumper select 120
Ω
terminator resistor for each port.
z
2 indicating LED (one for green and another for red).
z
Direct memory mapping to the CAN controllers.
z
33MHz 32bit 5V PCI bus (V2.1) plug and play technology.
z
2500Vrms photo-isolation protection on CAN bus.
U
DeviceNet Firmware Features
z
Programmable Master MAC ID.
z
Programmable transfer-rate 125K, 250K, 500K.
z
Each port support maximum nodes up to 64
z
Support Group 2 Only Server functions
z
Support UCMM functions
z
Predefined Master-Slave Connection Set
z
The maximum Fragment number is (Input/Output) up to 64
z
Support I/O Operation Mode: Poll, Bit-Strobe
and
Change Of
State/Cyclic
z
Support Auto-Scan slave device function.
z
Support on-line adding and removing devices.
z
Support boot-up auto communicating with slave devices.
z
Support Auto-Reconnect when the connection is broken.